The following are a list of  files which can be downloaded to 3D print devices from Med3dp

 

The Helping Hand - Prosthetic Arm

 

Mobile Phone Headlamp Holder

 

Triflow Incentive Spirometer

 

Modular Finger Splint

 

Universal Sharps Attachment

 

Personal Sharps Bin

 

SwingerFuge

 

Additional Hardware: (1) 3 mm metal screw, (1) corresponding nut - For drill bit

                                 (8) 2.5 mm diameter metal pins, and (16) corresponding o-rings - For swing buckets

CAUTION:
The device should not exceed a RPM of 5000

The operator should be fully trained in the use of a drill/dremel

Recommended that the drill/dremel should be  mounted to a platform

Ensure that all tubes are secured into the tube hole/holder and that there is no objects in the area that can cause any obstruction

FixiFuge

 

Additional Hardware: (1) 3 mm metal screw and (1) corresponding nut - For drill bit

CAUTION:
The device should not exceed a RPM of 5000

The operator should be fully trained in the use of a drill/dremel

Recommended that the drill/dremel should be  mounted to a platform

Ensure that all tubes are secured into the tube hole/holder and that there is no objects in the area that can cause any obstruction

Pocket Mask (New Version)

When printing the Pocket Mask (New Version) the valve (Old Version) must be scaled up by 46% on the 3D-Printing Software 

Pocket Mask Mould

 

Arm Splint

 

Umbilical Cord Clamp (New Version)

 

Kidney Tray

 

Adjustable Wrench

 

Flexible PLA Protocol

 

Otoscope- Hand Held

 

Wrist Brace

 

Otoscope

 

Fetoscope

 

Finger Splint

 

Laryngoscope

 

Neck Brace

 

Umbilical Cord

 

Tweezers

 

Surgical Kit

 

Stethoscope

 

Speculum

 

Scalpel

 

Reflex Hammer

 

Pocket Mask and Valve (Old Version)

 

PET Recycling

 

Oropharangeal Airway

 

Haemostatic Clamp

 

Asthma Spacer

 

Asthma Inhaler